3608 Wax powder

3608 wax powder

Used for UV, water-based, solvent-based paint inks and powder coatings to improve surface wear resistance and metal scratch resistance.

Product Information

Chemical composition

Modified oxidized polyethylene wax

Typical physicochemical data

The data given in this data page are only typical values and are not technical indicators of the product.

Melting point:             120±5 ℃

Particle size:              D50: 5 μm      D90：12 μm

Acid value:               3-5mg KOH/g

Supply form:              micronized powder

Storage and transportation

Storage in cool,dry or well-ventilated place.

Application

Liquid coating and inks

Product features and advantages

The additive has excellent dispersion and anti-flotation properties in UV, water-based and solvent-based coatings inks, significantly reduces the coating friction coefficient, and improves the wear resistance and scratch resistance of the coating.

Recommended Use

Waterborne coatings, printing varnish and ink and UV coatings.

Recommended dosage

0.3-2% additive dosage is based on the total formula, due to different formulations and process conditions, it is recommended to determine the best amount of additives before use.

Adding method and process guidance

This product can be dispersed in coatings and inks through high-speed stirring.

Powder coating

Features and advantages

The additive has excellent dispersion and anti-flotation properties in UV, water-based and solvent-based coatings inks, significantly reduces the coating friction coefficient, and improves the wear resistance and scratch resistance of the coating.

Recommended dosage

0.3-2% additives based on the total formula, due to different formulations and process conditions, it is recommended to test before use to determine the best amount of addition.

Adding method and process guidance

The product is recommended to be added when the base material is premixed and then completely extruded.