333 Wax powder

333 wax powder

Used for UV, water-based, solvent based coatings, inks, and powder coatings to improve surface wear resistance and metal scratch resistance.

Product Information

Chemical composition

Modified polypropylene wax

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Melting point:  160℃

Particle size:   D50:8μm  D90:14μm

Supply form:   Micronized powder

Storage and transportation

Store in cool,dry or well-ventilated place

Application

Liquid coating and ink

Product features and advantages

This additive can increase surface hardness and smoothness in UV, water-based, and solvent based paint inks, improve scratch resistance, and have a matte effect in a wide range of applications, giving the coating a soft and silky feel.

Recommended usage

Floor coating, printing varnish, UV floor coating, water-based coating

Recommended dosage

0.3-5%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

This product can be dispersed in coatings and inks through high-speed stirring, and can also be added after preparing wax slurry.

Powder coating

Features and advantages

This additive can improve surface hardness and scratch resistance, improve surface protection of powder coatings, and provide matting effects.

Recommended usage

0.3-2%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

It is recommended to add this product during the pre mixing of the base material and then squeeze it out completely.