312 Wax powder

312 wax powder

Used in UV, solvent-based paint inks and powder coatings to improve surface hardness and wear resistance.

Product Information

Chemical composition

polyethylene wax

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Melting point:        115℃

Particle size:         D50: 5μm     D90:10μm

Supply form:           Micronized powder

Storage and transportation

Storage in cool,dry or well-ventilated place.

Application

Liquid coating and inks

Product features and advantages

The additive can increase the surface smoothness in UV and solvent-based coating inks, improve scratch resistance, improve coating adhesion resistance, suspension and no sinking, recommended for solvent-based and solvent-free systems.

Recommended Use

Industrial coatings, printing inks, UV coatings, plastic coatings, furniture coatings, coil coatings, iron printing coatings.

Recommended dosage

0.3-3% additive dosage is based on the total formula, due to different formulations and process conditions, it is recommended to determine the best amount of addition before use.

Adding method and process guidance

The product can be dispersed in paints and inks by high-speed stirring or grinding, and can also be added after preparation of wax paste.

Powder coatings

Features and advantages

The additive can improve the surface smoothness and scratch resistance, and improve the surface protection of powder coatings.

Recommended dosage

0.3-2% additives based on the total formula, due to different formulations and process conditions, it is recommended to test before use to determine the best amount of addition.

Adding method and process guidance

The product is recommended to be added when the base material is premixed and then completely extruded. It can also be added to the sheet material mixed together with grinding and sifting, or added to the finished powder mixed and sifting.