312P Wax powder

312P wax powder

Used for water-based, solvent based, solvent-free, UV coating inks and powder coatings to improve surface smoothness and wear resistance.

Product Information

Chemical composition

Modified polyethylene wax

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Melting point:  115℃

Particle size:   D50:6μm  D90:11μm

Supply form:   Micronized powder

Storage and transportation

Store in cool,dry or well-ventilated place

Application

Liquid coating and ink

Product features and advantages

This additive can increase surface smoothness, improve scratch resistance, and enhance coating adhesion resistance in water-based and solvent based paint inks, with minimal impact on the gloss and transparency of the coating.

Recommended usage

Waterborne varnish, water-based and solvent based printing inks, UV coatings

Recommended dosage

0.3-3%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

This product can be dispersed in coatings and inks through high-speed stirring or grinding, and can also be prepared into wax slurry and added.

Powder coating

Features and advantages

This additive can improve surface smoothness and scratch resistance, and improve the surface protection of powder coatings.

Recommended dosage

0.3-2%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

It is recommended to add this product during the pre mixing of the base material and then squeeze it out completely. It can also be added to the sheet material, mixed well, ground and sieved together, or added to the finished powder, mixed well and sieved.