355 Wax powder

355 wax powder

Used for UV, solvent-based coating inks and powder coatings to improve surface smoothness and wear resistance.

Product Information

Chemical composition

Teflon modified polyethylene wax

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Melting point:                   120/320℃

Particle size:                     D50: 6μm     D90: 11μm

Supply form:                     Micronized powder

Storage and transportation

Storage in cool,dry or well-ventilated place.

Application

Liquid coating and inks

Product features and advantages

The additive can reduce the friction coefficient in solvent based coating inks, has excellent smoothness, and significantly improves the wear resistance and scratch resistance of the coating.

Recommended Use

Iron printing coating, coil coating, flooring painting, printing ink, wood coating, industrial coating, UV coating, water-based coating.

Recommended dosage

0.3-3% additive dosage is based on the total formula, due to different formulations and process conditions, it is recommended to determine the best amount of addition before use.

Adding method and process guidance

The product can be dispersed in coating and ink by high-speed stirring, and can also be added after preparation of wax paste.

Powder coatings

Features and advantages

The additive can improve the surface smoothness and scratch resistance, and improve the stain resistance of powder coatings.

Recommended dosage

0.3-2% additives based on the total formula, due to different formulations and process conditions, it is recommended to test before use to determine the best amount of addition.

Adding method and process guidance

The product can be directly dispersed in coatings and inks by high-speed stirring or grinding, and can also be added after preparation of wax paste.